Changing Window Placement With Drag And Drop - ABB COM600 series Data Historian Operator's Manual

4.9.2.
38
COM600 series, Version 5.0
Data Historian Operator's Manual
Menu item
Move To Next Tab Group
Move To Previous Tab Group

Changing window placement with drag and drop

Any window can moved to another position on the window area by dragging it from the
window tab. Place the mouse cursor on top of the window tab and move the mouse while
holding down the primary mouse button. A docking helper will appear in the middle of
the current view area.
Figure 4.9.2-1 Docking helper
The figure above shows the docking helper, which is used to set a window to a new
position. If the window is dropped on top of any of the four directional white rectangles,
the dragged window is placed inside the target window area. The target window area is
then split between the two windows in the desired direction and order.
Description
Moves the window to the next tab group. If there
are no more windows left in the former tab
group, it will be dismissed.
Moves the window to the previous tab group. If
there are no more windows left in the former
tab group, it will be dismissed.
1MRS756739
Window_docking_helper.jpg