Variable List - ABB COM600 series Data Historian Operator's Manual

7.2.
110
COM600 series, Version 5.0
Data Historian Operator's Manual
the search bar are combined with an AND operator, that is, the displayed items must
meet all the criteria listed in 7.1, List screen
To use the search and advanced search bars:
1. Enter the string mask in the search bar.
2.
Enter the string mask in the string mask fields in the advanced search bar (
above the column names.
3. Select the required options for columns from the list criteria boxes on the advanced
search bar (
4. Select the required options for columns from the yes/no boxes on the advanced
search bar (
5. Select the required time spans for time columns by first selecting Enable search
above the columns and then selecting the time spans from the time bars displayed
at the bottom of the list.
6. If the list to print is short, Vtrin continuously monitors items as you enter string
criteria and select options, and only displays the items corresponding to the criteria
and options. When the refresh button is flashing, click
activate the selections and view the results.
7. When you close the list window, you can save the content of the advanced search
bar and the appearance of the window (for example, column width). The content of
the search bar is not saved.
8. This enables you to create a variable list that displays all floating-point variables
for department X. When you open the variable list, you can, for example, select to
only view variables with the character 'z' in some column by entering string mask
*z* in the search bar. Closing the window does not change the original list.
You can save the content of the advanced search bar when
you close the list window. The contents of the search bar are
never saved.

Variable list

The variable list displays the database variables, which you can sort based on various
data and search using different criteria. You can also create, rename, and delete variables,
if you have sufficient rights for that.
Description of variable list
Open the variable list from the tree. You can also create your own variable lists by editing
the basic variable list and placing the variables anywhere in the tree. The default variable
list, however, remains in the Variable lists folder inside the Maintenance folder. This
folder contains pre-configured lists for different types of variables.
) above the column names.
) above the column names.
1MRS756739
)
Refresh to