Searching In The Tree Window - ABB COM600 series Data Historian Operator's Manual

4.5.2.
30
COM600 series, Version 5.0
Data Historian Operator's Manual
Figure 4.5.1-1 Setting content as root of the tree window
Menu item
Set as Root
The whole tree structure can be retrieved by selecting Reset Root from the popup menu
of newly set root folder.
Figure 4.5.1-2 Resetting the tree structure
Menu item
Reset Root

Searching in the Tree window

You can search for items matching your criteria inside the Tree window. The items are
found based on the names of the nodes. The search is started by clicking into the Tree
Search field under the Tree window.
Typing in the first letters narrows down the items visible in the tree.
Tree_folder_menu_set_as_root.jpg
Description
Sets the folder to act as a root of the tree. Only
the contents of the folder are left visible.
Tree_folder_menu_reset_root.jpg
Description
Restores the whole tree structure with the ori-
ginal root folder.
The expansion state of the tree is not
restored after the root has been reset
- all folders are collapsed.
1MRS756739