ABB COM600 series Data Historian Operator's Manual page 130

130
COM600 series, Version 5.0
Data Historian Operator's Manual
4. Right click the COM600RTDBBackup task and select Properties to enable the
task and set the time interval for task execution.
5. In the following COM600RTDBBackup Properties dialog, select the Triggers
tab.
6. Double click on the Daily Trigger entry to setup time interval for task execution
and click Ok. Make sure to check the Enabled check box to enable the task.
Figure 11.2-2
7. To edit the backup location for the task, choose the COM600RTDBBackup
Properties dialog and select the Actions tab.
8. Double click on Start a Program action item to launch the Edit Action dialog.
1MRS756739
Data_Hist_Edit_Trigger.png