KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study
the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields be fore starting your trac tor and
while mow ing. We recommend a wide vision safety mask for over the spec tacles or stan dard safety
Remove all parts and packing materials from carton.
Fold ﬂ aps to inside of carton and turn carton upsidedown
on ﬂ oor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
Check carton contents against list. Be sure all parts
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the as-
sembly instructions will identify the group needed for that step.
(4) Shoulder Bolt 5/16 - 18 Self Tapping
(2) Washer 11/32 x 1-1/2 x 10 Ga.
BAG OF PARTS CONTENTS
HARDWARE SHOWN ACTUAL SIZE
(2) Lock Washer 5/16
(3) Carriage Bolt 5/16 - 18 x 3/4
(3) Container Tops
(3) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(4) Bolt 5/16 - 18 x 3/4
(2) Wing Nut
NOT SHOWN FULL SIZE
(3) Locknut 5/16-18
(1) Support Tube
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal
(1) Bag of Parts
(1) Owner's Manual
(4) Locknut 5/16-18
(1) Support Plate