Table of Contents
Advertisement
DB9000-TX is controlled through the built-in web server and a standard web browser can be
used to monitor its status or make some adjustments. To connect to the device you need to know
its IP address and follow the next steps:
•
Open a web browser.
•
Enter the encoder's IP address in the browser's address field.
•
Press <ENTER>.
If you do not know the encoder's IP address you can hear it through the headphones when you
turn on DB9000-TX. The other option to find out the IP address is using UPnP discovery in local
networks (see "UPnP and DB9000-TX discovery in Local Networks" on page 27).
The web interface consists of the following pages:
•
Status
•
Configuration
•
Factory Defaults
•
Reboot
•
Firmware Update
At the top of each page is located the Navigational Menu and underneath, on the left side is the
section with relevant information and adjustments. There is a kind of help section on the right side,
containing brief information about each of the fields on the left.
Hover with your mouse over any of the left side fields to bring out a field's description next to
the mouse pointer.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Operation
- 14 -
Tel: +359 56/820027, Fax: +359 56/836700
E-mail: office@devabroadcast.com
Web: www.devabroadcast.com
Advertisement
Table of Contents
