Stryker 721 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. 721
  6. Maintenance manual

Stryker 721 Maintenance Manual

Transport stretcher
Hide thumbs Also See for 721:
Table of Contents

Advertisement

Quick Links

Transport Stretcher
Model 721
MAINTENANCE MANUAL
For Parts or Technical Assistance
1−800−327−0770 (Option 2)
IMPORTANT
File in your
maintenance
records

Advertisement

Table of Contents
loading

Related Manuals for Stryker 721

Summary of Contents for Stryker 721

  • Page 1 IMPORTANT File in your maintenance records Transport Stretcher Model 721 MAINTENANCE MANUAL For Parts or Technical Assistance 1−800−327−0770 (Option 2)

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ................Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings and Parts Lists Fifth Wheel Base Assembly ............. . Fifth Wheel Assembly .
  • Page 4 Table of Contents Assembly Drawings and Parts Lists (Continued) Removable I.V. Pole Assembly ............Tethered I.V.

  • Page 5: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the Model 721 Advanced Transport Stretcher. Read it thoroughly before using the equipment or beginning any maintenance on it. SPECIFICATIONS Maximum Weight Capacity 500 pounds Overall Stretcher Length \ Width 83”...

  • Page 6: Preventative Maintenance

    Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.

  • Page 7: Cleaning

    If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor- rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.

  • Page 8: Service Information

    Service Information CASTER COVER INSTALLATION AND REMOVAL Double Prongs Looking through the larger of the two side cut−outs, align the cover with the axle nut or bolt head, as shown. Single Prong Push down on the opposite side of the cover until the single prong engages the caster horn.

  • Page 9: Brake Rod Removal

    Service Information BRAKE ROD REMOVAL Required Tools: Hammer 7/32” Punch String or Bungee Cords Fifth Wheel Base 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.

  • Page 10: Side Control Brake Rod Removal

    Service Information SIDE CONTROL BRAKE ROD REMOVAL Required Tools: Hammer 7/32” Punch Needle Nose Pliers String or Bungee Cords Fifth Wheel Base 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.

  • Page 11: Foot End Release Pedal Replacement

    Service Information FOOT END RELEASE PEDAL REPLACEMENT Required Tools: Needle Nose Pliers 1. Apply the stretcher brakes. 2. Disconnect the release pedal return springs from the foot end release pedals. 3. Remove the rue ring cotters and the clevis pins connecting the foot end release pedals to the mounting bracket.

  • Page 12: Brake Ring Removal

    Service Information BRAKE RING REMOVAL Required Tools: 9/16” Socket w/Extension 3/8” Drive Ratchet Needle−Nose Pliers String or Bungee Cord 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.

  • Page 13: Big Wheel Hubcap Removal

    Service Information BIG WHEEL HUBCAP REMOVAL Required Tools: Large Standard Screwdriver 1. Using a large standard screwdriver, pry evenly around the entire edge of the Big Wheel hubcap until it pops off the mounting studs on the wheel. CAUTION Do not attempt to pull off the hubcap after prying up only one side. Damage to the slots on the hubcap or the mounting studs on the wheel could result.

  • Page 14: Big Wheel Carriage Removal

    Service Information BIG WHEEL CARRIAGE ASSEMBLY REMOVAL Required Tools: 1/2” Socket 3/8” Drive Ratchet Needle−Nose Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3. With the brake/steer pedal in the steer position, remove the clevis pin and rue ring cotter connecting the brake rod to the brake rod drive link at each end of the stretcher.

  • Page 15: Big Wheel Cam Gas Spring Dampener Removal

    Service Information BIG WHEEL CAM GAS SPRING DAMPENER REMOVAL Required Tools: 1/2” Socket 3/8” Drive Ratchet Needle−Nose Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3. Remove the two clevis pins and rue ring cotters connecting the brake rods to the drive arm at the center of the base near the cam bracket assembly.

  • Page 16: Jack Descent Rate Adjustment

    Service Information JACK DESCENT RATE ADJUSTMENT Required Tools: Screwdriver Bungee Cords (or equivalent) Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Support the hood from the litter using bun- gee cords so it is out of the way.

  • Page 17: Head End Hydraulic Jack Removal

    Service Information HEAD END HYDRAULIC JACK REMOVAL Required Tools: 1/2” Socket w/Extension 3/8” Drive Ratchet 1. Remove the litter top from the stretcher (see page 12). 2. Using a 1/2” socket with extension and a 3/8” drive ratchet, remove the two hex head screws holding the jack base to the stretcher base frame.

  • Page 18: Pneumatic Fowler Adjustment

    Service Information FOOT END HYDRAULIC JACK REMOVAL (BIG WHEEL BASE WITH 3−SIDED CONTROLS) Required Tools: 1/2” Socket 3/8” Drive Ratchet Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3.

  • Page 19: Transfer Board Counterbalance Adjustment

    Service Information TRANSFER BOARD COUNTERBALANCE ADJUSTMENT Required Tools: 7/16 Open End Wrench 1. Raise the transfer board to the full up position. 2. Unhook the extension spring at the eye bolt. 3. Using a 7/16 open end wrench, loosen the jam nut at the eye bolt. 4.

  • Page 20: Quick Reference Replacement Parts List

    Quick Reference Replacement Parts List PART NAME PART NUMBER Cam Replacement Kit, Big Wheel ..........1040−700−003 Caster Assembly (1 complete) .
  • Page 21 Quick Reference Replacement Parts List PART NAME PART NUMBER Paint, Touch−Up, Gloss Black, Bottle w/Brush ........7000−001−322 Paint, Touch−Up, Gloss Black, Spray Can .

  • Page 22: Fifth Wheel Base Assembly

    0753−006−110 Retractable Fifth Wheel Base Assembly Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw (page Fifth Wheel Assembly 0753−006−148 Cam Bearing 0023−305−000 Hex Hd. Cap Screw...

  • Page 23: Fifth Wheel Assembly

    0753−006−130 Fifth Wheel Assembly...

  • Page 24: Fifth Wheel Assembly

    0753−006−130 Fifth Wheel Assembly Item Part No. Part Name Qty. 0003−083−000 Hex Hd. Cap Screw 0016−035−000 Nylock Hex Nut 0023−288−000 Hex Washer Hd. Screw 0025−050−000 Rivet 0753−006−074 Torsion Spring 0753−006−075 Torsion Spring 0753−006−097 Drive Shaft Bearing 0753−006−106 Dampener 0753−006−108 Thrust Washer 0753−006−115 Bearing 0753−006−120...

  • Page 25: Base Assembly With Standard Brakes (Fifth Wheel Base)

    Base Assembly w/Standard Brakes (Fifth Wheel Base) Assembly part number 0753−003−105 (reference only)
  • Page 26 Base Assembly w/Standard Brakes (Fifth Wheel Base) Item Part No. Part Name Qty. 0005−039−000 Step Bolt 0011−262−000 Washer 0016−035−000 Nylock Hex Nut 0016−049−000 Nylock Hex Nut 0023−025−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0027−012−000 Hitch Pin 0027−022−000 Rue Ring Cotter 0028−037−000 External Retaining Ring...

  • Page 27: Brake Rod Assembly

    Brake Rod Assembly Assembly part number 0753−003−001 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Nyliner 0753−003−099 Butterfly “V” Pedal (page Drive Link Assembly 1210−201−335 Red Brake Label 1210−201−336...

  • Page 28: Drive Link Assembly

    0753−003−010 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−061 Brake Cam Drive Link 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−102 Brake Cam...

  • Page 29: Drive Link Assembly

    0753−006−135 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−098 Semi−Tubular Rivet 0753−006−122 5th Wheel Cam Drive Link 0753−006−147 Fifth Wheel Drive Link...

  • Page 30: Caster Assembly

    0753−010−020 8” Caster Assembly Item Part No. Part Name Qty. 0715−002−025 Wheel 0003−099−000 Hex Hd. Cap Screw 0753−010−021 Caster Horn w/Bearing 0016−060−000 Centerlock Nut...

  • Page 31: Base Assembly With Four−Sided Brakes

    Base Assembly with 4−Sided Brakes Assembly part number 0753−003−120 (reference only)
  • Page 32 Base Assembly with 4−Sided Brakes HEAD END FOOT END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0005−044−000 Step Bolt 0753−003−066 Clevis Pin 0011−262−000 Washer 0753−003−079 Brake Pin Guide 0016−035−000 Nylock Hex Nut (page Side Brake Rod Ass’y 0016−049−000 Nylock Hex Nut 0753−003−121...

  • Page 33: Side Control Brake Rod Assembly

    0753−003−210 Side Control Brake Rod Assembly Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0026−340−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link 0753−003−117 Rod End Link 0753−003−119 Side Control Brake Rod 0753−003−214 Shaft Support 1210−201−335...

  • Page 34: Brake Rod Assembly

    Brake Rod Assembly Assembly part number 0753−003−125 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Brake Rod Nyliner 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link (page Drive Link Assembly 1210−201−335...
  • Page 35 Base with Dual Side Hydraulics (Fifth Wheel Base) Assembly part number 0753−005−200 (reference only) HEAD END Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown Insert spring hook thru slots in pump pedal Attach other end onto jack tower as shown...
  • Page 36 Base with Dual Side Hydraulics (Fifth Wheel Base) Insert spring hook thru hole in pump connecting rod. Attach other hook to return spring as shown Insert spring hook onto hook on release pedal. Insert other hook onto pump connecting rod as shown.
  • Page 37 Base with Dual Side Hydraulics (Fifth Wheel Base) See Detail A Insert head end release rod into release valve assembly as shown DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL A See Detail B Item Part No.

  • Page 38: Release Pedal Assembly

    0753−004−101 Release Pedal Assembly Item Part No. Part Name Qty. 0025−079−000 Rivet 0753−004−004 Release Pedal Weldment 0753−004−029 Release Pedal Standoff 0753−004−320 Release Pedal Support 0753−004−321 Release Pedal Support 1061−201−127 Short Uni Pedal...

  • Page 39: Pump Pedal Assembly

    0753−005−185 Head End Pump Pedal Assembly Item Part No. Part Name Qty. 0026−343−000 Groove Pin 0715−001−140 Vinyl Tube 0753−005−044 Pump Pedal Bushing 0753−005−180 Head End Pump Pedal Weldment 0753−201−126 Pump Pedal...

  • Page 40: Base Labeling Assembly

    Base Labeling Assembly Assembly part number 0753−010−062 (reference only) Department Label page 41 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−040 Base Hood 1040−010−134 Bellows 0946−201−060 Stryker Logo Label...
  • Page 41 Base Labeling Assembly, 4−Sided Brakes Assembly part number 0753−010−063 (reference only) Department Label page 41 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−040 Base Hood 1040−010−134 Bellows 0946−201−060 Stryker Logo Label 0753−010−018 Brake/Steer Label, Right 0753−010−019 Brake/Steer Label, Left...

  • Page 42: Base Labeling Assembly

    Base Labeling Assembly Color Item D Brake/ Item E Item F Brake/ Item G Litter Set P/N Steer, Foot End Lift/Lower, Left Steer, Head End Lift/Lower, Right Bumper Strip 0753−010−051 0753−010−055 0753−010−017 0753−010−054 1010−700−015 0753−010−120 PURPLE 0753−010−151 0753−010−155 0753−010−170 0753−010−154 1010−700−025 0753−010−121 GREEN...
  • Page 43 Notes...
  • Page 44 Big Wheel End Control Base Assembly Assembly part number 1040−015−105 (reference only) HEAD END...
  • Page 45 Big Wheel End Control Base Assembly DETAIL A HEAD END See Detail A...
  • Page 46 Big Wheel End Control Base Assembly Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0025−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...

  • Page 47: Base Assembly With Standard Brakes (Big Wheel Base)

    Base Assembly w/Standard Brakes (Big Wheel Base) Assembly part number 1040−003−405 (reference only)
  • Page 48 Base Assembly w/Standard Brakes (Big Wheel Base) Item Part No. Part Name Qty. 0005−039−000 Step Bolt 0011−262−000 Washer 0016−035−000 Nylock Hex Nut 0016−049−000 Nylock Hex Nut 0023−025−000 Hex Washer Hd. Screw 0027−012−000 Hitch Pin 0027−022−000 Rue Ring Cotter Pin 0028−037−000 External Retaining Ring 0038−439−000 Extension Spring...

  • Page 49: Drive Link Assembly

    1040−003−185 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−098 Semi−Tubular Rivet 0753−003−102 Brake Cam 1040−003−174 Brake Rod Drive Link 1040−003−076 Cam Drive Link...

  • Page 50: Brake Rod Assembly

    1040−003−191 Brake Rod Assembly (Big Wheel Base) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 1040−003−113 Brake Rod 0753−003−099 Butterfly “V” Pedal...
  • Page 51 Base with Dual Side Hydraulics (Big Wheel Base) Assembly part number 1040−005−400 (reference only) Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown. Insert item P to retain pump connecting rod. 0753−002−025 Constant Descent Jacks 0753−002−080 Variable Descent Jacks...
  • Page 52 Base with Dual Side Hydraulics (Big Wheel Base) Insert spring hook thru hole in pump connecting rod weldment Attach other hook to return spring hook as shown. Insert spring hook into hook on release pedal assembly. Insert other hook into pump connecting rod weldment as shown.
  • Page 53 Base with Dual Side Hydraulics (Big Wheel Base) Insert head end release rod into release valve assembly as shown DETAIL A SEE DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL B SEE DETAIL A Item Part No.
  • Page 54 Notes...

  • Page 55: Cam Bracket Assembly

    Cam Bracket Assembly Assembly part number 1040−006−201 (reference only)
  • Page 56 Cam Bracket Assembly Item Part No. Part Name Qty. 0014−004−000 Washer 0014−063−000 Washer 0023−262−000 Clevis Pin 0026−330−000 Clevis Pin 0026−341−000 Clevis Pin 0026−349−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0027−025−000 Rue Ring Cotter 0081−400−000 Needle Bearing 0081−634−000 Needle Bearing 1040−006−209 Dampener 1040−006−141 Cam Pivot...

  • Page 57: Big Wheel Carriage Assembly

    Big Wheel Carriage Assembly Assembly part number 1040−015−101 (reference only) Item Part No. Part Name Qty. 0014−004−000 Washer 0026−341−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0028−330−000 Spiral Retaining Ring 0081−011−000 Needle Bearing 1040−015−006 Carriage Return Spring 1040−015−030 Cover w/Counterweight 1040−015−038 Washer 1040−015−053 Carriage Spring Retainer...
  • Page 58 Big Wheel 4−Sided Control Base Assembly part number 1040−025−105 (reference only) HEAD END...
  • Page 59 Big Wheel 4−Sided Control Base DETAIL A HEAD END See Detail A...
  • Page 60 Big Wheel 4−Sided Control Base Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0026−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...

  • Page 61: Side Control Big Wheel Carriage Assembly

    Side Control Big Wheel Carriage Assembly Assembly part number 1040−025−101 (reference only)
  • Page 62 Side Control Big Wheel Carriage Assembly Item Part No. Part Name Qty. 0011−148−000 Washer 0011−525−000 Washer 0014−004−000 Washer 0026−341−000 Clevis Pin 0026−342−000 Groove Pin 0027−020−000 Rue Ring Cotter 0028−166−000 External Retaining Ring 0028−330−000 External Retaining Ring 0081−011−000 Needle Bearing 0081−175−000 Thrust Bearing 0753−003−099 Butterfly “V”...

  • Page 63: Side Control Big Wheel Linkage Assembly

    1040−025−010 Side Control Big Wheel Linkage Ass’y Item Part No. Part Name Qty. 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−117 Rod End Link 1040−025−011 Main Link 1040−025−013 Toggle Pivot Plate 1040−025−016 Main Link Cover 1040−025−020 Yoke Weldment 1040−025−018 Toggle Pivot Spacer 1040−025−027 Link Spacer...
  • Page 64 Base Labeling Assembly − Big Wheel Base Assembly part number 1040−015−400 (reference only) Department Label page 64 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 1040−010−134 Bellows 1040−015−404 Base Hood 0946−201−060 Stryker Logo Label...

  • Page 65: Base Labeling Assembly

    Base Labeling Assembly Color Item D Brake/ Item E Item F Brake/ Item G Litter Set P/N Steer, Foot End Lift/Lower, Left Steer, Head End Lift/Lower, Right Bumper Strip 0753−010−051 0753−010−055 0753−010−017 0753−010−054 1010−700−015 0753−010−120 PURPLE 0753−010−151 0753−010−155 0753−010−170 0753−010−154 1010−700−025 0753−010−121 GREEN...

  • Page 66: Variable Descent Hydraulic Jack Option

    0753−002−080 Variable Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−070 Variable Descent Jack Assembly 0753−010−007 Reservoir Clamp...

  • Page 67: Constant Descent Hydraulic Jack Option

    0753−002−025 Constant Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−001 Constant Descent Jack Ass’y 0753−010−007 Reservoir Clamp...

  • Page 68: Litter Assembly

    Litter Assembly Assembly part number 0721−301−010 (reference only) HEAD END Detail of Siderail Latch...
  • Page 69 Litter Assembly HEAD END...
  • Page 70 Litter Assembly Item Part No. Part Name Qty. 0003−359−000 Hex Hd. Cap Screw 0004−135−000 But. Hd. Cap Screw 0004−136−000 But. Hd. Cap Screw 0004−330−000 Soc. Hd. Cap Screw 0011−077−000 Washer 0011−360−000 Washer 0014−021−000 Washer 0016−118−000 Hex Nut 0016−117−000 Stover Hex Lock Nut 0021−105−000 Set Screw 0023−104−000...

  • Page 71: Siderail Assembly

    Siderail Assembly, Right & Left Assembly part numbers 0721−026−096 (Right) 0721−026−097 (Left) (Left Side Shown) Item Part No. Part Name Qty. 1010−026−015 Top Rail 1010−026−083 Upright 1010−026−084 Upright, Bent 1010−026−082 Spacer 0025−106−000 Semi−Tubular Rivet 1010−026−010 Round Hole Plug 1010−026−085 Upright, Latch 1010−026−012 Bent Spindle Stop...

  • Page 72: Manual Fowler Assembly

    Manual Fowler Assembly Assembly part number 0721−232−010 (reference only) HEAD END Item Part No. Part Name Qty. 0721−232−019 Brace Assembly 0014−002−000 Nylon Flat Washer 0003−357−000 Hex Hd. Cap Screw 0016−118−000 Nylock Hex Nut 0003−355−000 Hex Hd. Cap Screw 1001−032−022 Position Bar Rest 0004−135−000 But.

  • Page 73: Pneumatic Fowler Assembly

    Pneumatic Fowler Assembly Assembly part number 0721−231−110 (reference only) HEAD END Item Part No. Part Name Qty. 0004−182−000 Hex Soc. But. Hd. Cap Screw 0004−183−000 Hex Soc. But. Hd. Cap Screw 0011−179−000 Washer 0014−021−000 Washer 0015−060−000 Hex Jam Nut 0016−116−000 Hex Nut 0016−117−000 Hex Nut...
  • Page 74 Pneumatic Fowler Assembly Assembly part number 0721−231−120 (reference only) Item Part No. Part Name Qty. 0004−135−000 But Hd. Cap Screw 0004−161−000 Hex Soc. But. Hd. Cap Screw 0007−071−000 Truss Hd. Mach. Screw 0015−037−000 Jam Nut 0015−050−000 Hex Nut 0016−118−000 Stover Lock Nut 0021−125−000 Set Screw 0021−126−000...
  • Page 75 Pneumatic Fowler Outer Housing Assembly Assembly part number 1210−031−106 (Right) Item Part No. Part Name Qty. 0025−144−000 Semi−Tubular Rivet 1210−031−103 Pivot Tab 1210−031−104 Outer Housing, Right Assembly part number 1210−031−107 (Left) Item Part No. Part Name Qty. 0025−144−000 Semi−Tubular Rivet 1210−031−103 Pivot Tab 1210−031−105...

  • Page 76: Transfer System Assembly

    0721−239−010 Optional Short Transfer System Assembly HEAD END Item Part No. Part Name Qty. (page Transfer System Ass’y, Rt. (page Transfer System Ass’y, Lt. 0010−011−000 Eye Bolt 0038−218−000 Tension Spring 1010−224−025 Spring Retainer 0003−359−000 Hex Hd. Cap Screw 0011−180−000 Flat Washer 0016−118−000 Nylock Hex Nut 0015−021−000...
  • Page 77 1010−232−010 Short Transfer Board Assembly, Right Item Part No. Part Name Qty. 1010−032−098 Pivot 1010−224−033 Connecting Link Ass’y, Rt. 1010−232−016 Pivot Arm Ass’y, Right 1020−032−100 Transfer Board Ass’y 0011−224−000 Nylon Flat Washer 0014−021−000 Nylon Flat Washer 0016−118−000 Nylock Hex Nut 0028−093−000 Retaining Ring 0003−356−000...
  • Page 78 1010−232−011 Short Transfer Board Assembly, Left Item Part No. Part Name Qty. 1010−032−098 Pivot 1010−224−033 Connecting Link Ass’y 1010−232−017 Pivot Arm Ass’y, Lt. 1020−032−100 Transfer Board Ass’y 0011−224−000 Nylon Flat Washer 0014−021−000 Nylon Flat Washer 0016−118−000 Nylock Hex Nut 0028−093−000 Retaining Ring 0003−356−000 Hex Hd.

  • Page 79: Transfer System Assembly

    0721−234−010 Optional Long Transfer System Assembly HEAD END Item Part No. Part Name Qty. (page Transfer System Ass’y, Rt. (page Transfer System Ass’y, Lt. 0010−011−000 Eye Bolt 0038−218−000 Tension Spring 0721−224−025 Spring Retainer, Rt. 0003−359−000 Hex Hd. Cap Screw 0011−180−000 Flat Washer 0016−118−000 Nylock Hex Nut...
  • Page 80 0721−234−012 Long Transfer Board Assembly, Left Item Part No. Part Name Qty. 0721−024−055 Transfer Board Ass’y 0721−024−046 Label 0721−224−016 Long Pivot, Machined 0721−224−033 Connecting Link Ass’y 0721−232−017 Pivot Arm Ass’y, Lt. 0028−093−000 Retaining Ring 0003−050−000 Hex Hd. Cap Screw 0011−224−000 Nylon Flat Washer 0014−021−000 Nylon Flat Washer...
  • Page 81 0721−234−013 Long Transfer Board Assembly, Right Item Part No. Part Name Qty. 0721−024−055 Transfer Board Ass’y 0721−024−046 Label 0721−224−016 Long Pivot, Machined 0721−224−033 Connecting Link Ass’y, Rt. 0721−232−016 Pivot Arm Ass’y, Right 0028−093−000 Retaining Ring 0003−050−000 Hex Hd. Cap Screw 0011−224−000 Nylon Flat Washer 0014−021−000...

  • Page 82: Removable I.v. Pole Assembly

    0390−025−022 Standard, Removable IV Pole Assembly Item Part No. Part Name Qty. 0024−023−000 Plastic Knob 0390−003−053 Double IV Ass’y 0393−003−043 Tube Assembly 0004−496−000 Soc. Hd. Cap Screw...

  • Page 83: Tethered I.v. Pole Assembly

    0721−117−000 Optional Tethered I.V. Assembly HEAD END Item Part No. Part Name Qty. 0025−133−000 Pop Rivet 0025−171−000 Rivet 0034−022−000 Cable Clamp 1001−159−042 I.V. Plug (page Tethered I.V. Pole Assembly 1211−117−021 Backing Plate 1211−117−022 I.V. Clip...

  • Page 84: Tethered I.v. Pole Assembly

    1211−117−010 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 0052−017−000 Spacer 1211−117−020 Cable Assembly 0926−400−062 Stop Sleeve 1010−059−016 I.V. Hook 1211−117−011 Extension Rod 1211−117−012 Base Tube Weldment 0004−495−000 Low Hd. Soc. Hd. Cap Screw 1211−117−016 Knob 0014−020−000 Nylon Washer 0004−232−000 Button Hd.

  • Page 85: Stage I.v. Assembly

    721−400−001 Optional 2−Stage I.V. Assembly Assembly part number 0721−280−000 & 0721−281−000 (reference only) HEAD END FOOT END Item Part No. Part Name (page I.V. Pole Assembly 1001−259−103 I.V. Pivot 0016−118−000 Fiberlock Nut 0004−452−000 But. Hd. Cap Screw 0003−356−000 Hex Hd. Cap Screw 0016−116−000...
  • Page 86 1211−210−010 Optional 2−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0008−031−000 Soc. Hd. Cap Screw 0052−017−000 Washer 0926−400−162 Spacer 1211−210−029 2nd Stage Assembly 1001−359−013 Dampener 1001−159−028 Base Tube 1010−059−016 I.V. Hook (page I.V. Pole Latch 1001−359−112 Pivot...
  • Page 87 1211−210−026 I.V. Pole Latch Assembly Item Part No. Part Name Qty. 0028−167−000 Retaining Ring 0031−004−000 Steel Ball 0038−392−000 Crest−to−Crest Spring 1211−091−034 Release Label 1211−110−018 I.V. Latch Seal 1211−110−020 Washer 1211−110−021 I.V. Latch Locking Pin 1211−110−022 I.V. Latch Guide 1211−110−024 I.V. Latch O.D. Housing 1211−110−035 Washer 1211−110−036...

  • Page 88: Stage I.v. Assembly

    0721−061−000 Optional 3−Stage I.V. Assembly, Head 0721−062−000 Optional 3−Stage I.V. Assembly, Foot FOOT END HEAD END Item Part No. Part Name Qty. (page I.V. Pole Assembly 1001−259−103 I.V. Pivot 0016−118−000 Fiberlock Nut 0004−452−000 But. Hd. Cap Screw 0003−356−000 Hex Hd. Cap Screw 0016−116−000 Flexlock Nut 1001−259−042...
  • Page 89 1211−211−010 Optional 3−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0007−004−000 Truss Hd. Machine Screw 0026−076−000 Roll Pin 0052−017−000 Spacer 1211−210−031 2nd Stage Assembly 0926−400−162 Spacer (page 3rd Stage Assembly 1001−161−023 Base Tube 1010−059−016 I.V. Hook 1010−061−014 Collar (page I.V.
  • Page 90 3−Stage I.V. Pole 3rd Stage Assembly Assembly part number 1211−110−032 (reference only) NOTE Item F, part number 1010−061−018 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 0031−021−000 Ball 0038−303−000 Compression Spring 1010−061−013 Ball Retainer 1010−061−016...

  • Page 91: C−Spine Cassette Holder Assembly

    1001−070−000 C−Spine Cassette Holder Assembly Item Part No. Part Name Qty. 1010−070−025 I.V. Adaptor 1010−070−018 Specification Label 0011−447−000 Flat Washer 0004−054−000 But. Hd. Cap Screw (page Support Pole Assembly (page Storage Bracket Ass’y 0016−118−000 Nylock Nut 0003−356−000 Hex Hd. Cap Screw 1001−070−011 Attachment Bracket 0003−355−000...
  • Page 92 1010−070−010 C−Spine Support Pole Assembly View A−A Item Part No. Part Name Qty. 1010−070−033 Support Tube Cap 0026−006−000 Roll Pin 1010−070−034 Support Arm Weldment 1010−070−042 Cassette Holder Weldment 1010−070−050 Adjustment Tube Weldment 1010−070−030 Base Tube Weldment 1010−070−045 Knob 0025−055−000 Pop Rivet 1010−070−044 Pivot Pin 0026−005−000...
  • Page 93 1010−070−019 C−Spine Storage Bracket Assembly 6.5” (Ref.) 2” (Ref.) Item Part No. Part Name Qty. 1010−070−020 Storage Bracket Weldment 1010−070−045 Knob 1010−070−023 Storage Label...

  • Page 94: Defibrillator Tray Assembly

    0926−039−000 Optional Defibrillator Tray Assembly Assembly part number 0926−039−010 (reference only) Umbrella Nut/Crosstube Detail Strap Securing Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0946−039−004 Tray 0946−039−003 Support Tube 0926−039−016 Crosstube 0926−001−082 Label 0025−055−000 Rivet 1010−050−021 Long Strap 0926−039−009...

  • Page 95: Foot Extension/Defibrillator Tray Assembly

    1010−050−100 Foot Extension/Defibrillator Tray Ass’y Assembly part number 1010−050−210 (reference only) Label Detail Label Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0008−049−000 Soc. Hd. Shoulder Bolt 1010−050−050 Knob 0014−020−000 Nylon Washer 1010−050−057 “Max. Weight” Label 0014−021−000 Nylon Washer 1010−050−205 Cushion Assembly...

  • Page 96: Foot Board

    0926−040−100 Foot Board/Chartholder Assembly Assembly part number 0926−040−010 (reference only) Item Part No. Part Name Qty. 0946−028−011 Chart Holder 0946−029−006 Foot Board 1020−030−000 Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 1020−030−011 Upright Bottle Holder 0027−012−000 Cotter Pin 1020−030−017 Specification Label...
  • Page 97 1040−010−090 Optional O@ Bottle Retainer Assembly Base Hood Item Part No. Part Name Qty. 1040−010−091 Bottle Retainer 1040−010−092 Scrulok Fastener...

  • Page 98: Mattresses And Siderail Pads

    Mattresses and Siderail Pads Mattress, 3” Thick x 24” Wide, Standard ......part # 1059−324−140 Mattress, 4”...

  • Page 99: Mattresses And Siderail Pads

    Mattresses and Siderail Pads Mattress, 26” Wide ..........part # 1059−426−010...

  • Page 100: Warranty

    If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall...

  • Page 101: Return Authorization

    Stryker will perform all service during regular business hours (9−5) * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re- sulting from abuse.
  • Page 102 European Representative Stryker EMEA RA/QA Director Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 6300 S. Sprinkle Road, Kalamazoo, MI 49001−9799 (800) 327−0770 www.strykermedical.com DH 6/04 0721−209−002 REV A...

Table of Contents