Table of Contents
Advertisement
Product Overview
Hardware features
Port 17: Type : EMPTY
Port 18: Type : EMPTY
Port 19: Type : 10G XG-SR(SFP+)
Vendor: Brocade Version: 1
Part# : PLRXPLSCS4371 Serial#: xxxxxxxxx
Port 20: Type : 10G XG-SR(SFP+)
Vendor: Brocade Version: 1
Part# : PLRXPLSCS4371 Serial#: xxxxxxxxx
Port 21: Type : EMPTY
Port 22: Type : EMPTY
Port 23: Type : EMPTY
Port 24: Type : EMPTY
Port 25: Type : 1G M-C (Gig-Copper)
Port 26: Type : 1G M-C (Gig-Copper)
Port 27: Type : 1G M-C (Gig-Copper)
Port 28: Type : 1G M-C (Gig-Copper)
10 Gbps ports
Ports 1 - 24 support 1-GbE SFP transceivers and 10-GbE SFP and SFP+ transceivers listed in
FIGURE 3
24 10-GbE ports
1
10-GbE Ports
Four 10/100/1000 Mbps ports
The ports 25~28 are 10/100/1000 copper ports that use auto-sensing and auto-negotiating to determine the speed (10 Mbps, 100
Mbps, or 1000 Mbps) and mode (full-duplex or half-duplex) of the port at the other end of the link, and adjust port speed accordingly.
10/100/1000 ports on the TurboIron 24X support RJ-45 copper connectors. The output of the show media command displays C next
to the ports that have copper connectors installed.
Gigabit copper ports on the TurboIron 24X support auto MDI or MDIX detection. For more information about this feature, refer to
"Configuring MDI/MDIX" in the TurboIron Configuration Guide.
10GbE SFP+ transceiver
TurboIron 24X support a 10GbE SFP+ transceiver specifically for ports 1-24. LEDs on the module faceplates indicate operational status:
•
If the LED is on, the port is connected. If the LED is off, no connection exists, or the link is down
•
If the LED is on or blinking, traffic is being transmitted and received on the port
LEDs for network interfaces and power supplies
The fiber and copper ports on TurboIron 24X provide status information through the LEDs listed in
interfaces and power supplies are:
•
24 10-Gbps fiber ports (1~24 port) have LEDs located under each of them.
•
Four 10/100/1000 copper ports (25~28) have Link and Activity LEDs to indicate port status.
16
1
Table
1.
Figure 3
A
Table
2. The LEDs for network
Brocade TurboIron 24X Series Hardware Installation Guide
Part Number: 53-1003053-03
shows ports 1 - 24.
Advertisement
Table of Contents
