Phillips Screwdriver
UNPACKING AND CHECKING CONTENTS
Carefully unpack the grinder and all its parts, and compare against the list below and the
illustration to the right. With the help of an assistant place the grinder on a secure surface and
examine it carefully.
WARNING
!
● To avoid injury from unexpected starting or electrical shock, do not plug the power cord
into a source of power during unpacking and assembly. The cord must remain unplugged
whenever you are adjusting/assembling the grinder.
● The grinder is heavy and should be lifted with care. If needed, get the assistance of
someone to lift and move the grinder.
● If any part is missing or damaged, do not attempt to assemble the grinder, or plug in the
power cord until the missing or damaged part is correctly replaced.
TABLE OF LOOSE PARTS
ITEM
A.
B.
C.
D.
E.
F.
G.
TOOLS NEED FOR ASSEMBLY
CARTON CONTENTS
Bench grinder
Left / Right tool rest
Tool rest lock knob and washer
Eye shield
Eye shield lock knob and bolt
LED light assembly and composite screw
LED light assembly battery
Not Supplied
Adjustable Wrench
DESCRIPTION
10
8 mm & 13 mm
open wrench
Q'TY
1
1 each
2 each
2
2 each
2 each
4