Troubleshooting Guide - Porter-Cable PCXB515BG Instruction Manual

6in. (150 mm) single speed bench grinder

Hide thumbs

Table Of Contents

Table of Contents

WARNING

To avoid injury from an accidental start, turn the switch OFF and always remove the plug from

the power source before making any adjustments.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our service website

at www.portercable.com. You can also order parts from your nearest Porter-Cable Factory

Service Center or Porter-Cable Authorized Warranty Service Center. Or, you can call our

Customer Care Center at (888) 609-9779.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information

about Porter-Cable, its factory service centers or authorized warranty service centers, visit our

website at www.portercable.com or call our Customer Care Center at (888) 609-9779. All repairs

made by our service centers are fully guaranteed against defective material and workmanship.

We cannot guarantee repairs made or attempted by others.

You can also write to us for information at

Hill, SC

29730, - Attention: Product Service. Be sure to include all of the information shown on

the nameplate of your tool (model number, type, serial number, etc.).

PROBLEM

PROBLEM CAUSE

Motor will not

1. Not plugged into power outlet.

run.

2. Switch is not in ON position.

3. Motor cord cut or abraded.

4. Plug on cord is faulty.

5. Faulty motor.

6. Fuse on circuit breaks open.

Grinding

1. Grinding wheel is not fixed properly.

wheel

vibrates or

2. Other.

shakes.

For assistance with your product, visit our website at www.portercable.com for a list of service

centers, or call the Porter-Cable Customer Care Center at (888) 609-9779.