Wireless Designer Software And Usb Driver - Lectrosonics M2R Instruction Manual

M2R
Wireless Designer
Software and USB Driver
Windows Installation
Download the Wireless Designer software installer
from the web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
http://www.lectrosonics.com/europe/
or use the flash drive supplied with the receiver.
These instructions are useful for the first time the soft-
ware is being installed. Once the software is installed,
updates are available by simply clicking on an item in
the Help Menu. Refer to the help menu for details.
Launch the installer and follow the screen prompts.
I Agree on the EULA (end user license agreement)
must be checked to continue the installation.
14
The installer includes USB drivers, which only need to
be installed once. By default, the boxes are unchecked
in the installer, because they are not required except
for the very first time the software is installed on the
computer being used.
If it is the first time the software is being installed,
check the appropriate box to install the USB driver for
the receiver model you are connecting.
If the USB driver is installed, the software will commu-
nicate with whichever model is connected.
When the installation is complete, the confirmation
screen will appear. Click on Finish to complete the
installation.
LECTROSONICS, INC.