Related information
•
Exterior lamp positions (p. 574)
•
Bulb specifications (p. 578)
Replacing the rear fog lamp bulb
The rear foglight is fitted in the rear bumper on
the driver's side.
The rear fog light is only fitted on the driver's side.
1. Loosen the foglight unit on the driver's side
by inserting a flat object, such as a table
knife or a screwdriver, on the bulb kit's nar-
rower short side of the keypad and then prize
the foglight unit out.
2. Unplug the connector.
3. Undo the bulb holder by turning it anticlock-
wise and pulling it out.
4. Remove the bulb by pressing it in and turn-
ing anticlockwise.
5. Fit a new bulb by pressing it in and turning it
clockwise.
6. Attach the bulb holder by turning it clock-
wise.
MAINTENANCE AND SERVICE
7. Plug in the connector.
8. Insert the hook on the wide part of the fog-
light unit in the rear bumper and rotate the
unit inwards so that the clips engage.
Related information
•
Exterior lamp positions (p. 574)
•
Bulb specifications (p. 578)
577