Bulb Specifications; Windshield Wipers In The Service Position - Volvo XC 90 Owner's Manual

WARNING
•
The ignition should be switched off com-
pletely (be in ignition mode 0) when
replacing bulbs.
•
If the engine has been running just prior
to replacing bulbs in the headlight hous-
ing, please keep in mind that components
in the engine compartment will be hot.
Related information
•
Bulb specifications (p. 529)
•
Ignition modes (p. 376)
Halogen headlights are not available in all models.
4

Bulb specifications

The following specifications apply to models
4
equipped with halogen headlights. If other
bulbs need to be replaced, contact a trained
and qualified Volvo service technician.
Function
[W]
Low beam 55
High Beam 65
Front turn signal 24
Daytime running light/ 21/5
parking light
A Watt
Related information
•
Replacing bulbs (p. 528)
Windshield wipers in the service
position
The windshield wiper blades must be in the verti-
cal (service) position for replacement, washing
or to lift them away from the windshield when
e.g., removing ice or snow.
A Type
H11
H9
PY24W
W21/5W
Wipers in the service position
CAUTION
Be sure the wiper blades are not frozen in
position before attempting to move them to
the service position.
MAINTENANCE AND SERVICING
}}
529