MAINTENANCE AND SERVICE
||
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease from your fingers is
vaporised by the heat, coating the reflector
and then causing damage.
Related information
•
Exterior lamp positions (p. 574)
•
Bulb specifications (p. 578)
•
Bulb replacement (p. 573)
576
Changing brake light bulb
Bulbs for brake lights are located behind the
panel in the side of the cargo area.
1. Press in the panel hatch at the upper edge
to detach it.
2. Move the insulation aside to access the
brake light bulb.
3. Undo the black bulb holder by turning it anti-
clockwise and pulling it out.
4. Remove the bulb by pressing it in and turn-
ing anticlockwise
5. Fit a new bulb by pressing it in and turning it
clockwise.
6. Attach the bulb holder by turning it clock-
wise.
7. Move back the insulation and then hook in
the panel and press it back into place.
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease from your fingers is
vaporised by the heat, coating the reflector
and then causing damage.