IMPORTANT
The car must not be driven with tyres of dif-
ferent sizes or with a spare tyre other than
the one supplied with the car. Using different-
sized wheels can cause serious damage to
the car's transmission.
The spare wheel is located in the spare wheel
well with the outside down. The foam block con-
tains all the tools for changing a wheel.
Related information
•
When changing wheels (p. 529)
•
Recommended tyre pressure (p. 523)
Taking out the spare wheel
Follow these instructions for handling the spare
wheel.
1. Fold up the cargo area floor, from the rear
and forwards.
2. Lift out the foam block with its tools.
3. Undo the retaining screw.
4. Lift out the spare wheel.
Storing the punctured tyre
1. Take out the wheel bag enclosed in the foam
block and put the wheel in the bag.
2. Put the tools back in their right place in the
foam block and lift it back into the car.
3. Screw in the foam block using the mounting
screws and then fold down the cargo area
floor.
4. Place the punctured tyre in the cargo area.
Storing the punctured tyre
1. Take out the wheel bag enclosed in the foam
block and put the wheel in the bag.
2. Screw back the mounting screw that held the
tyre in place.
3. Put the tools back in their right place in the
foam block and lift it back into the car.
4. Then fold down the cargo area floor and
place the punctured tyre in the cargo area.
WHEELS AND TYRES
Related information
•
Spare wheel* (p. 534)
•
Folding up the cargo area floor (p. 553)
535
* Option/accessory.