LOADING, STORAGE AND PASSENGER COMPARTMENT
||
2. Hook one retaining hook of the net into the
front or rear roof mounting with the anchor-
ing strap locks turned towards you.
Remove any clothing hooks from the roof
bracket by turning it a quarter turn clockwise
on the left-hand side and a quarter turn anti-
clockwise on the right-hand side respectively.
3. Hook the net's other retaining hook into the
roof mounting on the opposite side - the
telescopic spring-loaded retaining hooks
facilitate alignment.
Take care to press forward the net's retain-
ing hooks for each respective roof moun-
ting's front end position.
554
4. Rear fitting: With the net fitted in the rear
roof mountings, hook the safety net's anchor-
ing straps into the front floor eyes in the
cargo area.
Rear fitting.
Front fitting: With the net fitted in the front
roof mountings, hook the anchoring straps
into the outer eyes on the rear of the seat
slide rails - it is easier if the backrests are
straightened and the seats are moved for-
ward slightly.
Front fitting.
Pay attention to make sure that you do not
press the seat and backrest hard against the
net when they are moved back again - only
adjust until the seat or backrest makes con-
tact with the net.
IMPORTANT
If a seat or backrest is pushed backwards
hard into the safety net, the net and roof
mounts may be damaged.
5. Tension the safety net with the anchoring
straps.