Volvo XC40 Owner's Manual page 86

DISPLAYS AND VOICE CONTROL
||
Symbol Specification
Active main beam off
The symbol lights up white when
active main beam is off. Position
lamps are switched on.
Main beam On
The symbol lights up when main
beam and the position lamps are
switched on.
Front fog lamps on
This symbol illuminates when the
front fog lamp is switched on.
Rear fog lamp on
This symbol illuminates when the
rear fog lamp is switched on.
Rain sensor on
This symbol illuminates when the
rain sensor is on.
Preconditioning on
The symbol illuminates when the
engine block and passenger com-
partment heater/air conditioning
are preconditioning the car.
84
Symbol Specification
Stability system
A flashing symbol indicates that
the stability system is operating. If
the symbol illuminates with con-
stant glow then there is a fault in
the system.
Stability system, sport mode
The symbol illuminates when the
sport mode is activated. Sport
mode allows for a more active driv-
ing experience. The system then
detects whether the accelerator
pedal, steering wheel movements
and cornering are more active than
in normal driving and then allows
controlled skidding of the rear sec-
tion up to a certain level before it
intervenes and stabilises the car.
Lane assistance
White symbol: Lane assistance is
on and road lines are detected.
Grey symbol: Lane assistance is on
but road lines are not detected.
Amber symbol: Lane assistance
warns/intervenes.
Symbol Specification
Lane assistance and rain sensor
White symbol: Lane assistance is
on and road lines are detected.
Rain sensor is on.
Grey symbol: Lane assistance is on
but road lines are not detected.
Rain sensor is on.
A
AdBlue system
The symbol illuminates when the
AdBlue level is low or in the event
of a fault in the AdBlue system.
A Applies to cars with diesel engines.
Related information
•
Driver display (p. 75)
•
Warning symbols in the driver display
(p. 85)