Resetting Temperature Status - Avaya Cajun P550 Manager 5.1 User Manual

Chapter 2

Resetting Temperature Status

2-36
* Note: If a component's status is non-operational, power down
the switch and contact your service representative to
diagnose the failing unit.
You can view and reset the temperature status of the switch. To
display the temperature status:
1. Start Cajun P550/P880 Manager. For information about
starting the Cajun P550/P880 Manager, refer to "Starting the
Cajun P550/P880 Manager" earlier in this chapter.
2. In a Cajun P880 switch representation, right-click on the
blank area of the chassis to the left of modules three to
eight.
Or
In a Cajun P550 switch representation, right-click on the
panel with the handle to the left of the module.
Or
In a Cajun P220 switch representation, right-click in the
blank area of the chassis.
3. Select Temperature Status from the pull-down menu. The
Temperature System dialog box of the Cajun Switch Web
Agent opens (Figure 2-10).
* Note: If necessary, use the panel divider to resize the
system information panel.
4. Use Table 2-8 to set the threshold values.
5. Click APPLY to save temperature values.
Cajun P550/P880 Manager User Guide