Viewing Power System Statistics - Avaya Cajun P550 Manager 5.1 User Manual

Viewing Power System Statistics

Cajun P550/P880 Manager User Guide
Configuring the Cajun Switch Using the P550/P880 Manager
4. From the Allow Learning pull-down menu, select Disable to
stop the port's learning of new addresses. This feature can be
useful for security. Selecting Enable allows the port to learn
new addresses.
5. From the Hunt Group pull-down menu, select a hunt group
for which this port will be a member. Refer to the
Cajun P550/P220 Switch Operations Guide for more information
on hunt groups.
6. From the Spanning Tree pull-down menu, select to Enable or
Disable spanning tree protocol on this port.
7. From the Fast Start pull-down menu, select to Enable or
Disable. When enabled, Fast Start mode ports begin
forwarding traffic without waiting for the spanning tree
negotiation to complete. Fast start eliminates the waiting
time of listen and learn states. Ports immediately enter the
forward state.
8. From the Known Mode pull-down menu, select to Enable or
Disable. Selecting Enable suppresses the packets with
unknown unicast destination addresses flooded to the port.
For example, if a known end-station or file server is
connected to the port, there's no need to flood unknown
unicasts to the port. You must manually enter a static MAC
address for the station actually attached to the port.
9. Click APPLY to save your changes, or CANCEL to restore
previous settings.
You can view power system statistics for the switch. To display the
power system statistics:
1. Start Cajun P550/P880 Manager. For information about
starting the Cajun P550/P880 Manager, refer to "Starting the
Cajun P550/P880 Manager" earlier in this chapter.
2. In a Cajun P550 or Cajun P880 switch representation, right-
click the power supply of the switch and select
Power Properties.
Or
In a Cajun P220 switch representation, right-click in the
blank area of the chassis and select Power Properties.
2-33