Table of Contents
Advertisement
Chapter 3
Switch Statistics displays information using different types of graphs:
The title of the Switch Statistics window displays the Device IP Address.
The gauges, pie charts, and bar graph show data for the latest time
currently visible on the traffic graph. For more information, refer to
"Viewing the Switch Statistics Traffic Graph" on page
You can use the gauges, pie charts, and traffic graph to view data from an
earlier point in time by scrolling the traffic graph. For more information
about modifying the display, refer to
page
mouse movement options, refer to
on page
Viewing the Switch Statistics Gauges and Pie
Charts
The gauges at the top of the window display the following information:
18
• Gauges that show error packets and capacity.
• A pie chart that shows the ratio of Unicast, Broadcast, and
Multicast packets.
• A pie chart that shows the ratio of packets by priority.
• A traffic graph section that contains line graphs describing the
characteristics of the traffic traveling through the switch.
74. For more information on the available toolbar, status bar, and
14.
Table 3-1. Gauge Variables in Switch Statistics
Variable
Description
Errors
Displays the percentage of packets that contain errors going
through the device on a logarithmic scale. If this
percentage is high, this indicates that there may be a
problem.
Capacity
Displays the proportion of traffic in relation to the device's
configured capacity, as a percentage. If the capacity used
nears the device's total capability, this indicates there may
be a problem.
19.
"Using the Options Dialog Box" on
"Working with Device SMON Tools"
Avaya C460 SMON User Guide
Advertisement
Table of Contents
