Default And User Defined Protocols - Avaya C460 SMON User Manual

Default and User Defined Protocols

Protocol Directory automatically includes a number of popular protocols
for the Avaya C460 router modules to monitor, referred to as Default
Protocols, listed in the table below. In addition, you can include other
protocols for monitoring by specifying corresponding TCP/UDP ports,
referred to as User Defined Protocols.
Default Protocols include a number of network and transport protocols
(Layers 3 and 4 in the OSI seven-layer model), such as IP and ARP, as well
as many popular application protocols (Layer 7), such as Telnet and SMTP.
User Defined Protocols are TCP/UDP port numbers corresponding to
application protocols (Layer 7) you select for the Avaya C460 router
module to monitor.
The following table provides a list of the Default Protocols with a
description of the protocols.
The following table provides a list of the seven initial User Protocols with
a description of the protocols.
Avaya C460 SMON User Guide
Protocol
IP
ARP
VRRP
ICMP
OSPF
RIP
Protocol
FTP over TCP/IP
Telnet over TCP/IP
SMTP over TCP/IP
HTTP over TCP/IP
POP3 over TCP/IP
Using Protocol Distribution and DSCP Statistics
Table 9-1. Default Protocols
Description
Total IP packets travelling through the device.
ARP packets travelling through the device.
VRRP packets travelling through the device.
ICMP packets travelling through the device.
OSPF packets travelling through the device over IPX.
RIP packets travelling through the device.
Table 9-2. User Protocols
Description
FTP packets travelling through the device over IP.
Telnet packets travelling through the device
SMTP packets travelling through the device.
HTTP packets travelling through the device
POP3 packets travelling through the device.
.
.
67