Solutions When Network Alert E-Mails Are Not Received - Epson BrightLink 710Ui User Manual

Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in window,
enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the
password. The default password is admin.
• To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password
set in the projector's Network menu as the password. The default password is guest.
• Avoid connecting via a proxy server.
• Make sure you have access to the network the projector is on.
• Check the IP address on the projector, then reenter the IP address in the browser search bar.
Note: The user ID and password are case sensitive.
Parent topic:

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure your electrical outlet or power source is functioning properly.
• Make sure you set up the projector e-mail alert settings correctly on the projector's network
Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Change the Port setting according to your network environment.
Parent topic:
Related references
Network Projector E-mail Alert Messages
Related tasks
Setting Up Projector Network E-Mail Alerts
Solving Network Problems
Solving Network Problems
277