Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. In the Extended menu of each projector, set the Sync of Projectors setting to Wired.
Note: If you are syncing multiple projectors with a combination of wired and infrared connections, set
the Wired Sync Mode setting to Mode 2 in each projector's Extended menu. If you are syncing
using an infrared connection and the projectors are more than 6.6 feet (2 m) apart, set the Distance
of Projectors setting to Mode 1 in each projector's Extended menu.
Parent topic:
Related concepts
Using Multiple Projectors (DuoLink)
Related references
Projector Setup Settings - Extended Menu
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
Projector Connections
56