Table of Contents
Advertisement
Setting
Standby Mode
ECO Display
Note: The Light Source Mode setting is disabled if you turn on the Multi-Projection setting in the
Extended menu.
Parent topic:
Adjusting the Menu Settings
Options
Standby Mode
Port
On
Off
239
Description
Communication On: indicates
that the projector can be
monitored and controlled over a
network when the projector is in
standby mode; enable this
setting to allow the following
operations to occur when the
projector is in standby mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
Port: selects the Wired LAN or
Wireless LAN port to use while
the Standby Mode setting is set
to Communication On
Displays a leaf icon in the bottom
left corner of the projected screen
to indicate the power-saving
status when the laser brightness
changes
Advertisement
Table of Contents
