Epson BrightLink 710Ui User Manual page 262

On/Standby Status light
light
Blue Flashing blue
Blue Off
Flashing blue Off
Flashing blue Varies
Off Flashing blue
Flashing blue Varies
Laser light Temp light
Off Off
Off Off
Off Off
Varies Flashing
orange
Off Orange
Flashing Varies
orange
262
Status and solution
Warming up. Wait for an image to
appear.
Shutting down. (When the Status light
stops flashing, you can unplug the
projector.)
Standby, sleep mode, or monitoring.
Preparing for monitoring or quick
startup mode; all features are
disabled.
Projector is too hot.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental
temperature is not too hot.
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Laser warning. Turn the projector off,
unplug it, and contact Epson for help.