Table of Contents
Advertisement
To Configure Auto Answer:
1.
Click the Auto Answer button.
2.
Select either:
•
Instantly
•
After x Rings (i.e. x = 1-10 rings)
Notes:
•
If you select "Off" you wont be able to configure auto answer for "If in Call or Conference".
•
If the incoming intercom call auto-answer feature is enabled, incoming intercom calls will always be answered
instantly even if the auto answer setting is configured for "After x Rings".
3.
Click the if in call or conference button.
4.
Select either:
•
Decline New Call and Remain in Old Call
•
Conference New Call Into Old Call
•
Answer New Call and Disconnect Old Call
•
Answer New Call and Put Old Call on Hold
5.
If you don't have to configure anything else on the screen, click Done.
To Configure the Maximum Video Data Transmit and Receive Rates
1.
Click the Max 8000i Transmit button and select the desired rate (i.e. the maximum transmit rate in Kbps when in calls
with BluStar 8000i/BluStar for Conference Room devices).
2.
Click the Max 8000i Receive button and select the desired rate (i.e. the maximum receive rate in Kbps when in calls
with BluStar 8000i/BluStar for Conference Room devices).
3.
Click the Max H.264 Transmit button and select the desired rate (i.e. the maximum transmit rate in Kbps when in calls
with non-BluStar 8000i/non-BluStar for Conference Room devices).
4.
Click the Max H.264 Receive button and select the desired rate (i.e. the maximum receive rate in Kbps when in calls
with non-BluStar 8000i/non-BluStar for Conference Room devices).
5.
If you don't have to configure anything else on the screen, click Done.
41-001514-01 Rev00 – 09.2013
Application Menu
50
Advertisement
Table of Contents
