Table of Contents
Advertisement
Installation and Setup
Connecting to External Components
Connecting to a 720p HD Display
To connect the BluStar for Conference Room to a 720p HD display, perform the following:
1.
Connect one end of the HDMI cable to the HDMI output port marked VIDEO OUT on the BluStar for Conference Room.
2.
Connect the other end of the HDMI cable to an available HDMI input port located on the display.
Connecting to the HD Color Video Camera
To connect the BluStar for Conference Room to the HD color video camera, perform the following:
1.
Connect the HDMI connector end of the DVI to HDMI cable to the HDMI input port marked VIDEO IN on the BluStar for Conference
Room.
2.
Connect the DVI connector end of the DVI to HDMI cable to the DVI output port marked DVI on the HD color video camera.
3.
Connect one end of the RS-232C serial cable to the VISCA port marked COM on the BluStar for Conference Room.
4.
Connect the other end of the RS-232C serial cable to the VISCA input port marked VISCA IN on the HD color video camera.
Notes:
• The BluStar for Conference Room does not support the use of two video cameras (i.e. one analog and one digital)
simultaneously.
• If using your own analog video camera with Component video output, a Component video cable is required instead
of an HDMI cable. Connect one end of the Component video cable (not included) to the Component input ports
marked VIDEO IN on the BluStar for Conference Room and connect the other end to the Component video cable to
the Component output ports on the analog video camera.
Connecting to the Aastra S850i Wireless Base Unit
To connect the BluStar for Conference Room to Aastra S850i Wireless Base Unit, perform the following:
1.
Connect one end of the primary audio cable (provided with the BluStar for Conference Room package) to the audio output port
marked LINE OUT on the BluStar for Conference Room.
2.
Connect the other end of the primary audio cable into the audio input port marked AUX IN on the Aastra S850i Wireless Base Unit.
3.
Connect one end of the secondary audio cable (provided with the BluStar for Conference Room package) to the audio input port
marked LINE IN on the BluStar for Conference Room.
4.
Connect the other end of the secondary audio cable into the audio output port marked AUX OUT1 (or AUX OUT2) on the Aastra
S850i Wireless Base Unit.
Connecting to the Wireless USB Keyboard
To connect the BluStar for Conference Room to the Wireless USB Keyboard, simply plug the USB RF Receiver into one of
the USB ports on the BluStar for Conference Room.
7
41-001514-01 Rev00 – 09.2013
Advertisement
Table of Contents
