Table of Contents
Advertisement
Placement Options
The BluStar for Conference Room and additional accessories/components can be placed on a media stand, mounted in a
standard 2U audio/video component rack system, or mounted on the wall if desired. For comprehensive placement
option details, refer to the Aastra BluStar for Conference Room Installation Guide.
Interface Port Descriptions
Label (from
Port
Left to Right)
PWR
Power
COM
Serial
USB
USB (x2)
LAN
Ethernet
VIDEO OUT
HDMI Output
VIDEO IN
HDMI Input
VIDEO IN
Component Input
LINE IN
Audio Input
LINE OUT
Audio Output
Connecting to the Network
To connect the BluStar for Conference Room to the network, perform the following:
1.
Connect the provided Ethernet cable into the Ethernet port marked as LAN.
2.
Connect the other end of the Ethernet cable directly into the Ethernet port of your network device (e.g. router or switch).
Connecting to Power
To connect the BluStar for Conference Room to power, perform the following:
1.
Connect the power cord to the power supply.
2.
Connect the power supply plug to the power input port marked PWR on the BluStar for Conference Room.
Alert!
For use with the included ENG Electric Co., Ltd AC/DC adaptor model no. 3A-603DB12 or Globtek Inc. AC/DC adaptor model no.
GT-41132-6012-T3.
3.
Insert the power cord plug into an electrical outlet.
41-001514-01 Rev00 – 09.2013
Description
Used to connect the power supply.
Used to connect the HD color video camera via RS-232C Serial cable.
Used to connect the USB RF receiver, allowing for communication between the BluStar for Conference Room
and the Wireless USB Keyboard
Used to connect to the network via a Category 5/5e or Category 6 straight through cable.
Used to connect to a 720p HD display via an HDMI cable.
Used to connect to the HD color video camera via HDMI to DVI cable.
(Optional) Used to connect to an analog HD color video camera via a Component video cable.
Used to connect to the Aastra S850i Wireless Base Unit via the provided mono audio cable with 3.5mm male to
male connectors.
Used to connect to the Aastra S850i Wireless Base Unit via the provided mono audio cable with 3.5mm male to
male connectors.
Installation and Setup
6
Advertisement
Table of Contents
