Downloading And Installing Patches; Downloading Patches - Sun Microsystems QLogic SANbox 5600 Manual

3. Type the CD serial number and click Continue.
4. Read and accept the license agreement.
5. Download the software.

Downloading and Installing Patches

The section that follows provides instructions for downloading and installing
patches for the QLogic SANbox 5600/5602, as well as any other QLogic or Sun
StorEdge Network 2-Gbit FC switches. See the sections
page 3 and "Installing the Switch Into an Existing Fabric" on page 4
or recommended firmware versions and associated patch IDs.

▼ Downloading Patches

1. Access the SunSolve
http://sunsolve.sun.com
2. Read and accept the terms and conditions of the License Agreement.
3. From the Support category, select Patches and Updates.
4. Under PatchFinder, type the patch ID and click Find Patch.
Do not type the -xx revision number. PatchFinder automatically finds the latest
patch.
5. Verify that you have retrieved the correct patch.
6. Print the page.
Printing this page also prints the patch README file, which contains the
installation instructions, special instructions, special guidelines, and notes.
7. Download the patch by clicking on either HTTP or FTP as shown in the
following line:
Download Patch (nn,nnn,nnn bytes) HTTP FTP.
8. Click PatchFinder and repeat the process from Step 4 for each patch.
SM
web site at:
QLogic SANbox 5600/5602 Stackable FC Switch Hardware Release Notes
"Firmware Requirements" on
for the required
5