Release Notes - Sun Microsystems QLogic SANbox 5600 Manual

QLogic SANbox 5600/5602
Stackable FC Switch Hardware

Release Notes

This document contains important information about the QLogic SANbox 5600 and
SANbox 5602 Stackable Fibre Channel (FC) switch hardware installed in Sun
storage area networks (SANs).
Note – The only difference between the QLogic SANbox 5602 and 5600 switches is
that the 5602 has two hot-swappable power supplies, while the 5600 has one fixed
power supply.
Read this document so that you are aware of issues or requirements that can impact
the installation and operation of the QLogic SANbox 5600 and 5602 FC switch in a
Sun SAN.
Note – Sun is not responsible for the availability of third-party web sites mentioned
in this document. Sun does not endorse and is not responsible or liable for any
content, advertising, products, or other materials that are available on or through
such sites or resources. Sun will not be responsible or liable for any actual or alleged
damage or loss caused by or in connection with the use of or reliance on any such
content, goods, or services that are available on or through such sites or resources.
This document contains the following sections:
"Product Features" on page 2
■
"Switch Requirements" on page 2
■
"Downloading and Installing Patches" on page 5
■
"Related Documentation" on page 6
■
"Service Contact Information" on page 6
■
™
1