Steam Out Phi 2000 Vapore - Philips 2000 PURO/VAPORE Service Manual

PHI 2000 PURO/VAPORE 05 SERVICE MODE
5.4

Steam Out PHI 2000 VAPORE

This document describes the procedure of SteamOut in PHI 2000 Vapore machine. This application
is used in order to empty the heater.
The machine enters in SteamOut mode by moving the knob in the water position
then pushing the COFFEE LONG button
and then connecting the machine to the plug.
As long as the COFFEE LONG button is pressing the machine shows all LEDS ON: Led Activity, Led
Double Coffee, Led Alarm, Led NO_Water, Led CalclClean.
When the COFFEE LONG button is release the machine starts the Steam Out: Led CalcClean flashing.
During this phase if the knob is moving in the central position the steam out procedure will be in-
terrupted and the red led "General Alarm" will be switched On, in order to continue the steam out
procedure move back the knob in the water position.
When the steam out procedure is completed the Led Double Coffee switch on and the Led CalcClean
switch OFF.
Now is possible to switch off the machine or repeat the procedure moving the knob in the central
position and after moving again the knob in the water position.
14/14