Table of Contents
Advertisement
PHI 2000 PURO/VAPORE
5.3
Steam Out PHI 2000 PURO
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
This document describes the procedure of SteamOut in PHI 2000 Puro machine. This application is
Proceed as follows for perform the Steam-out.
used in order to empty the heater.
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
500mm length in the silicon tube O 5x10
500mm length in the silicon tube Ø 5x10
Proceed as follows for perform the Steam-out.
Proceed as follows for perform the Steam-out.
500mm length in the silicon tube O 5x10
500mm length in the silicon tube O 5x10
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
inner pressure.
inner pressure.
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
inner pressure.
inner pressure.
then connecting the machine to the plug.
then connecting the machine to the plug.
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
then connecting the machine to the plug.
then connecting the machine to the plug.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
fee, Led Alarm, Led NO_Water, Led CalclClean.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Coffee,
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
Led Alarm, Led NO_Water, Led CalclClean.
fee, Led Alarm, Led NO_Water, Led CalclClean.
fee, Led Alarm, Led NO_Water, Led CalclClean.
2
2
2
1) Open the service door
2) Extract the Brew-unit
1) Open the service door
1) Open the service door
1) Open the service door
2) Extract the Brew-unit
2) Extract the Brew-unit
2) Extract the Brew-unit
When the buttons are released the machine shows Led Calc Clean flashing.
When the buttons are released the machine shows Led Calc Clean flashing.
When the buttons are released the machine shows Led Calc Clean flashing.
When the buttons are released the machine shows Led Calc Clean flashing.
Press coffee button to start the steam-out proccess.
Press coffee button to start the steam-out proccess.
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the "double coffee" Led lights up and the "Calc Clean"
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the "double coffee" Led lights up and the "Calc Cle-
Led switch OFF.
When the steam out procedure is completed the "double coffee" Led lights up and the "Calc Cle-
an" Led switch OFF.
When the steam out procedure is completed the "double coffee" Led lights up and the "Calc Cle-
an" Led switch OFF.
an" Led switch OFF.
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
(cod. 20000440 12NC 996530009825) in the silicon tube as
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
in the Picture. (silicon tube cod. JS01.022)
(cod. 20000440 12NC 996530009825) in the silicon tube as
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
in the Picture. (silicon tube cod. JS01.022)
1
1
1
3) Insert the BLACK WATER INLET SLEEVE BREW
UNIT assembly, in the boiler pin
3) Insert the BLACK WATER INLET SLEEVE BREW
3) Insert the BLACK WATER INLET SLEEVE BREW
3) Insert the BLACK WATER INLET SLEEVE BREW UNIT
UNIT assembly, in the boiler pin
UNIT assembly, in the boiler pin
assembly, in the boiler pin
Stimulate Micro door
Stimulate Micro door
Stimulate Micro door
Insert the coffe ground drawer
Insert the coffe ground drawer
Insert the coffe ground drawer
Insert the coffe ground drawer
3
3
3
Stimulate Micro door
05 SERVICE MODE
Warning:
Insert the silicone tube
Warning:
Warning:
Warning:
into a container because
Insert the silicone tube
Insert the silicone tube into
Insert the silicone tube
steam is released
into a container because
into a container because
a container because steam
steam is released
steam is released
is released
13/14
Hide quick links:
Advertisement
Table of Contents
