Test Mode Phi 2000 Puro - Philips 2000 PURO/VAPORE Service Manual

PHI 2000 PURO/VAPORE
5.1

Test Mode PHI 2000 Puro

Double Coffee Led Descaling Led
No water Led Coffee button
The machine enters in test mode by pushing the COFFEE button
and then connecting the machine to the plug
As long as the COFFEE button is pressing the machine shows the Led Calc-Clean, Led Activity, Led
Alarm, Led NoWater, Led DoubleCoffee flashing with rotation.
When the COFFEE button is release the machine pass to the first level of the test.
There are 5 different levels, in each level the coffee-machine can execute different commands:
Level 1: The machine can test the input signal:
a) Microswitch present of the brewing unit
b) Microswitch present of the dregdrawer
c) Microswitch door closed/opened
d) Button Coffee
e) Button ON-OFF
f) Capacitive sensor water
Level 2: The machine can test the loads in low voltage:
a) Brewing unit (24V DC)
Level 3: The machine can test the Pump in high voltage:
a)Pump (120-230V AC)
Level 4: The machine can test the Heater load in high voltage:
a)Heater (120-230V AC)
Level 5: The machine can test the Grinder load in high voltage:
a)Grinder (320V DC)
ON/OFF button
Alarm Led
Activity Led
This document describes the test
mode of XS PH Puro Machine. This
application is used in order to test
the machine in its mechanics and
electronic components.
05 SERVICE MODE
1/14