Philips 2000 PURO/VAPORE Service Manual page 22

PHI 2000 PURO/VAPORE 03 BRIEF INSTRUCTIONS
Indications Description
The 'water tank empty' light lights up continuously. The water level is low. Fill the
water tank with fresh water up to the MAX indication.
The warning light lights up continuously and the on/off button goes out. The
coffee grounds container is full. Empty the coffee grounds container while the
machine is on. Make sure that the warning light flashes before you reinsert the
coffee grounds container.
The warning light and the on/off button light up continuously. The coffee bean
container is empty. Refill the coffee bean container.
The warning light flashes quickly. There is no water in the internal circuit. Turn
the control dial to the hot water icon and let hot water come out of the machine
until the water flows continuously.
The warning light flashes slowly. The brewing unit is not correctly inserted, the
coffee grounds container is not inserted, the maintenance door is open or the
control dial is not in the correct position. Make sure the brewing unit and coffee
grounds container are inserted correctly, the maintenance door is closed and the
control dial is in the correct position. If you cannot take out the brewing unit or
place it back, switch the machine off and on again.
The lights flash slowly and simultaneously. The machine is out of order. Switch off
the machine for 30 seconds, then switch it back on. Try this two or three times.
If the machine does not reset, contact the Philips Consumer Care Centre in your
country.
6/9