If level 0 is selected, the 'No Ring' icon
shown.
Press [INT/OK] to confirm the selection.
To change the melody, choose either 'EXT Ring' or 'INT
Ring' for external or internal incoming call.
10 normal ring tone melodies can be selected.
User may change the ring melody by pressing
[MENU/
] or [
/
The selected melody tone can be heard during selection.
Press [INT/OK] to confirm the selection.
Changing the name for the handset
User can change the handset's name displayed during
standby by choosing 'HS NAME' from the menu.
If the handset name has been stored, the name will be
displayed and the user can change it.
Setting tones on/off
There are 4 kinds of tone can be set to on or off: key
tone, confirm tone (including error tone), low battery
tone and range out tone.
The key beep tone can be set to on or off by selecting
'KEY' from the menu 'TONES'. The previous setting
'On/Off' can be seen.
Choose the desired setting and then press [INT/OK].
The other tones can be set as key tone.
Setting call timer on/off
The call timer display during a call can be set to on or off
by selecting 'Timer'. Similar to setting key beep on/off,
the previous on/off setting will be shown after selection.
Choose the desired setting and then press [INT/OK].
Setting auto answer mode on/off
The auto answer function can be set to on or off by
selecting 'Auto Ans' from the menu. Similar to setting
key beep on/off, the previous on/off setting will be
shown after selection.
Choose the desired setting and then press [INT/OK].
Reset Handset Default setting
By choosing 'Default' under 'Handset', user will be
asked to confirm the resetting procedure.
Once confirmed, all the handset setting parameters will
be reset to default values.
Changing base ring tone melody &
volume
To change the melody, choose 'Melody' under 'BASE'
and press [INT/OK].
10 normal ring tone melodies can be selected.
User may change the ring melody by pressing
[MENU/
] or [
/
The selected melody tone can be heard during selection.
Press [INT/OK] to confirm the selection.
To change the base ringer volume, pressing [MENU/
or [
/
] to choose 'Volume' under 'Base' and press
[INT/OK].
It is allowed to change the volume from 0 to 5 levels and
the base ring tone can be heard at the same time.
If level 0 is selected, the base ringer will be turned off.
Press [INT/OK] to confirm the selection.
will be
].
].
14
]