Activating/Deactivating Automatic Call Answering; Setting The Alarm; Entering/Changing Handset Name - GE 22437 User Manual

Press or key to select ON or OFF.
Press key to confirm the setting.
Note: Out of range warning beep only can be activated in talk mode.
Key Tone
You may set the key tone to ON or OFF when you press the keypad.
Press key.
Press or key to select SETUP HS and press
key.
Press or key to select TONES and press
Press or key to select KEY TONE and press
key.
Press or key to select ON or OFF.
Press key to confirm the setting.
Activating/Deactivating Automatic Call
Answering
The automatic call answering function enables the incoming call to
be taken immediately when the handset is removed from the base
station.
Press key.
Press or key to select SETUP HS and press
key.
Press or key to select AUTO TALK and press
key.
Press or key to select ON or OFF.
key to confirm the setting.
Press

Setting the Alarm

Press key.
Press or key to select SETUP HS and press
key.
Press or key to select ALARM and press
Press or key to select ON or OFF.
TO set alarm:
Press when scroll to ON.
Enter the time (HH:MM) and press
"am" or "pm".
Press to confirm the setting.
Note: When the alarm is set, "A" will be shown on the lower right
corner of LCD.
To disable alarm:
Press when scroll to OFF.

Entering/Changing Handset Name

It is possible to assign a name to each handset. This name is then
displayed when the phone is in standby mode.
Press key.
Press or key to select SETUP HS and press
key.
Press or key to select HANDSET NAME and press
key.
Edit the desired name (up to 13 characters) using number key
(any incorrect input can be deleted by
Press key to confirm the setting.
Changing the contrast setting
Press key.
Press or key to select SETUP HS and press
key.
Press or key to select CONTRAST and press
key.
Press or key to adjust contrast level (5 levels).
or key to select
key).
– 12 –
key.
key.