Table of Contents
Advertisement
Battery charging
When a handset is initially started up (reloading the
batteries or charging up from empty batteries), the
battery will be fast charged for 3 hours.
During a normal usage scenario, when a handset is used
and is put on cradle, the battery will be fast charged for at
about 15 minutes.
If the battery level reaches 2 bars, the system will charge
for 3 hours.
While the battery is being charged, the following
animation on the battery icon can be seen.
After the charging period, fast charge cycle will stop and
the battery icon will be shown as full steadily.
An empty battery has to be charged for about 14 hours in
order to reach maximum capacity.
Paging function
If the [
] key is pressed on base during standby mode,
base will beep once and the handset will output the
paging tone. 'PAGING' message will be shown on LCD;
Pressing the [
] key or any key on handset can stop the
page tone and page display.
5 Menu functions
General description
The menu can only be accessed when the handset is in
standby mode.
All individual functions are listed in the form of a menu.
Pressing [MENU/
] to enter the menu and the first
selectable item can be seen.
For example the first selectable item in menu is shown.
The next item can be chosen by pressing [
[MENU/
] until the desired item is shown on the
display. User may then press [INT/OK] to confirm the
selection.
Alternatively, a user may also press an index digit for the
desired item to directly select that item.
At any stage of menu function, user may like to go one
level up by pressing [C/ ] or press and hold [C/ ] to
completely leave the menu.
At any stage, user may like to connect to the base
immediately by pressing [
For the sake of convenience, a list of selectable options
will be shown as following, although only one item will
be actually displayed on the LCD.
The previous selection will always be shown first and
user can change the selection by pressing [
[MENU/
]. User may like to press [INT/OK] to
confirm the selection or cancel the selection and go back
on level up by pressing [C/ ].
Handset can exit from menu mode after no key pressing
for 20 seconds.
When entering into CALL LOG or BASE, a 'WAITING'
will show to indicate that handset is asking for service
from base and waiting for base response.
/
].
/
11
] or
] or
Advertisement
Table of Contents
