Table of Contents
Advertisement
is left, the earliest MISSED call information will be
displaced.
Except for the number that can be stored, some 'Absent
reason' will also be stored in the call log.
Message waiting management
Two kinds of message waiting are considered: VWMI
ON and VWMI OFF.
Message waiting management is independent of call log.
MSG LED on base is flashing or not flashing to indicate
message waiting or no message waiting exist
Any type of CID with VWMI ON to activate MSG LED
flashing, whereas any type of CID with VWMI OFF to
deactivate it.
User can clear message waiting manually through
'CLEAR MSG' under 'BASE' menu.
Off-Hook caller ID indication
When the handset is connecting with the external line,
caller ID can also be indicated if off-hook caller ID
signal is detected from the telephone. The caller's
number will be shown for 8 seconds.
The caller's number will be saved to the call log and the
entry will become as unread call.
Reviewing caller ID number
The previous caller ID information can be read by
choosing 'Call Log' from the menu.
Alternatively, users can press the [
standby to view the list.
If there is no caller ID information, the following screen
can be seen for 2 seconds before reverting back to
standby mode.
If there is caller ID information, the most recently
received caller's number will be shown first. If the call
information has not been read before, the 'CLI' icon
will be on.
After the unread caller ID is read, it will become missed
call and be removed from unread list.
Phone book number matching will be performed on the
caller number in call log as well. If there is a match, the
name of the caller for that entry will be firstly shown.
If the name has more than 9 characters, the rest of the
name will be omitted. Press [MENU/
number or name in the next row.
Besides '0'-'9', only'*' and '#' could be displayed in the
number field.
Apart from the number can be stored, some 'Absent
reason' will also be stored in the call log.
Press [MENU/
] or [
previous caller ID information.
If the caller information for an entry has been read before,
the 'CLI' icon
will not appear.
If caller ID name is not provided, the first page show
blank as,
If the caller's number is too long to be seen at once,
pressing [MENU/
] to show the unseen content on the
right.
If date-time information is available, user may press
[MENU/
] to view the date-time information (MM/DD
hh:mm, 24 hour) located at the end of the current call log
entry.
Operation on call log
To operate the caller ID number from call log, choose
/
] key during
] to view the
/
] to view the next or
17
Advertisement
Table of Contents
