Handset Name
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Handset name sub-menu.
. Press menu button to enter the menu. The default setting is Handset.
. Use the touch-tone pad to enter a name (up to 1 characters). More than one
letter is stored in each of the number keys. For example, to enter Bill Smith, press
the key twice for the letter B. Press the 4 key times for the letter I. Press the
5 key times for the letter L. Press the 5 key times for the second letter L, and
press the 1 key to insert a space between the first and last name. Press the 7 key
4 times for the letter S; press the 6 key once for the letter M; press the 4 key
times for the letter I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
NOTE: If you make a mistake, press cid/vol (- or +) button to move
the cursor forward or backward, then use the mute/clear button to
backspace and delete one character at a time.
NOTE: * key is a function key to toggle between the upper case and
low case of characters during text edit.
4. Press the menu button to save your name. You will hear a confirmation tone and
the screen displays Saved.
Base Station Setup
1. Make sure your phone is OFF (not in talk mode).
. Press the menu button to go to the main menu.
. Press cid/vol (3or4) button to scroll to Setup BS.
4. Press menu button to confirm and you may program the following items: Area
Code, Dial mode and BS Backlight.
19