Test Mode Forcing; Phasor Measurement Unit Test Values - GE F60 Instruction Manual

TESTING

5.12.2 Test mode forcing

SETTINGS  TESTING  TEST MODE FORCING
 TESTING

When in Forcible mode, the operand selected by the
testing conditions, as described in the following two sections.
The test mode state is indicated on the relay front panel by a combination of the Test Mode LED indicator, the In-Service
LED indicator, and by the critical fail relay, as shown in the following table.
Table 5-46: Test mode operation
TEST MODE
FUNCTION
Disabled
Isolated
Forcible
On restart, the
their default states.
5

5.12.3 Phasor Measurement Unit test values

SETTINGS  TESTING  PMU TEST VALUES  PMU 1 TEST VALUES
 PMU 1
 TEST VALUES
5-358
TEST MODE FORCING:

On
In-service Test mode Critical fail
LED LED relay
Unaffected Off Normal
Off On De-energized No effect
Off Flashing De-energized Off
setting and the force contact input and force contact output settings revert to
TEST MODE FORCING
PMU 1 TEST

FUNCTION: Disabled
PMU 1 VA TEST

MAGNITUDE: 500.00 kV
PMU 1 VA TEST

ANGLE: 0.00°
PMU 1 VB TEST

MAGNITUDE: 500.00 kV
PMU 1 VB TEST

ANGLE: –120.00°
PMU 1 VC TEST

MAGNITUDE: 500.00 kV
PMU 1 VC TEST

ANGLE: 120.00°
PMU 1 VX TEST

MAGNITUDE: 500.00 kV
PMU 1 VX TEST

ANGLE: 0.00°
PMU 1 IA TEST

MAGNITUDE: 1.000 kA
PMU 1 IA TEST

ANGLE: –10.00°
PMU 1 IB TEST

MAGNITUDE: 1.000 kA
Range:
setting dictates further response of the F60 to
TEST MODE FORCING
TEST MODE Contact input and output behavior
FORCING
No effect Normal
Contact outputs disabled
Normal
On Controlled by forcing features
Range: Enabled, Disabled
Range: 0.00 to 700.00 kV in steps of 0.01
Range: –180.00 to 180.00° in steps of 0.05
Range: 0.00 to 700.00 kV in steps of 0.01
Range: –180.00 to 180.00° in steps of 0.05
Range: 0.00 to 700.00 kV in steps of 0.01
Range: –180.00 to 180.00° in steps of 0.05
Range: 0.00 to 700.00 kV in steps of 0.01
Range: –180.00 to 180.00° in steps of 0.05
Range: 0.000 to 9.999 kA in steps of 0.001
Range: –180.00 to 180.00° in steps of 0.05
Range: 0.000 to 9.999 kA in steps of 0.001
F60 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
FlexLogic operand