Table of Contents
Advertisement
10 DECOMMISSIONING
The device is decommissioned in the same way as it was commissioned, but
in reverse order.
The order of the points "Disconnect" and "Dismount" is decided by the
accessibility of the device when mounted in the operating environment.
10.1 Disconnect
Only disconnect the device when it is not processing.
1. Disconnect the device from the operating voltage supply.
2. Disconnect communication:
° Disconnect the PLC/power cable from the control unit.
° Remove the RJ45 plug of the Ethernet cable from the host computer.
° Remove the D-Sub plug of the RS232 cable from the process control
system.
° Remove the D-Sub plug of the SVGA-cable from the monitor.
3. Disconnect all cables from the device.
51
999.994.256.10-en-1.4
ADVICE
ADVICE
© Vision & Control GmbH 2014
pictor M1606
Decommissioning
Advertisement
Table of Contents
