Commissioning; Unpacking - Vision & Control Pictor M1606 Instructions For Use Manual

7 COMMISSIONING

7.1 Unpacking

Damage or destruction of the device caused by condensation and large
temperature differences!
• Do not subject the device to large temperature fluctuations.
• After storage and transport, allow the device to adjust slowly to the
ambient temperature at the place of use.
• Do not open the lens cover during the acclimatisation (to prevent the
formation of condensation water).
Unpack the device in a dry, dust-free environment.
1. Lift the cardboard, together with the device, out of the carton.
2. Fold out the tucked in sides on the bottom of the cardboard.
Loosening the film and forming an insertion pocket.
3. Remove the device out of the insection pocket.
4. Dispose the packing material (see "Disposal", Page 53).
31 999.994.256.10-en-1.4
DAMAGE OF PROPERTY
ADVICE
Commissioning
© Vision & Control GmbH 2014
pictor M1606