Table of Contents
Advertisement
pictor M1606
Maintenance and Service
9 MAINTENANCE AND SERVICE
9.1 Maintenance
The device is maintenance-free. Depending on the operating environment, it
may have to be cleaned.
Cleaning the outer face
The housing can be cleaned according to the conditions applicable to the given
protection class.
Clean the outside with a damp cloth and a gentle cleanser.
Cleansers must not be applied directly to the housing, and the housing must
not be bathed.
Do not use any corrosive cleansers, such as lyes, MEK cleanser (methyl ethyl
ketone), benzine or similar substances!
The device must not be opened. The port sockets must be clean and dry
before the device is connected and brought into operation.
Cleaning the protective glass / filter
Do not scratch and keep dust and grease off the protective glass! Do not touch
the glass!
If it is heavily soiled, clean the protective glass with a cotton bud soaked in
ethyl, methyl or isopropyl alcohol. The alcohol must not be applied directly to
the protective glass.
Clean and care for the lenses as described in the guide for the relevant lens.
Cleaning by the manufacturer
The device can be sent to the manufacturer for cleaning (for a fee). Please
contact our Technical Support.
49
999.994.256.10-en-1.4
© Vision & Control GmbH 2014
Advertisement
Table of Contents
