Connecting The Power Supply - Vision & Control Pictor M1606 Instructions For Use Manual

pictor M1606
Commissioning

7.3.8 Connecting the Power supply

When using the power supply (AC adapter), the digital I/O interfaces of the
device can not be used.
Perform the following steps only in de-energiesed state.
1. Plug the 12-pin HIROSE connector of the power supply into the I/O socket
on the device.
2. Plug the power supply into a socket.
© Vision & Control GmbH 2014
ADVICE
999.994.256.10-en-1.4 44