York SUNLINE 2000 Manual page 9

UNIT DIMENSIONS - CONT'D. -
CONDENSER
SECTION
GAUGE LINE
ACCESS
40-3/8"
SUPPLY
AIR
RETURN
5-1/2"
AIR
COMPRESSOR
ACCESS
SUPPLY AIR
ACCESS 18-5/8"
27-3/4"
5-1/8"
RETURN AIR
ACCESS
REAR
VIEW
Unitary Products Group
(DCE / DCG)
OUTDOOR
AIR
40-1/2"
OUTDOOR AIR
29-5/8" (15 TON)
COMPARTMENT
39-5/8" (20 TON)
ACCESS
39-5/8
ACCESSORY SIDE SUPPLY AND RETURN AIR OPENINGS
ECONOMIZER / MOTORIZED DAMPER
RAIN HOOD
870
(34-1/4")
610 (24") (180)
889 (35") (240)
UNIT WITH RAIN HOOD
2254
(92")
1078
(44")
CENTER OF GRAVITY
EVAPORATOR
SECTION
DUCT COVERS - Units are shipped with the bottom
duct openings covered. An accessory flange kit is
available for connecting side ducts.
DOT PLUG
For bottom duct applications:
(For pressure
1. Remove the side panels from the supply and return
drop reading)
air compartments to gain access to the bottom
supply and return air duct covers.
FILTER
ACCESS
2. Remove and discard the bottom duct covers. (Duct
openings are closed with sheet metal covers except
when the unit includes a power exhaust option. The
covering consists of a heavy black paper composition.)
3. Replace the side supply and return air compartment
panels.
For side duct applications;
1. Replace the side panels on the supply and return air
compartments with the accessory flange kit panels.
2. Connect ductwork to the duct flanges on the rear of
1" NPT FEMALE
COND. DRAIN the unit.
CONNECTION
DETAIL "X"
397
⁄
5
15 "
8
DETAIL "Y"
3338 (136-1/4"(
530.26-TG4YI
1376
(56")
9