Temperature Setting; Power Saving Mode - Motorola MBP36S User Manual

4.7

Temperature Setting

M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
O
3. Press the
4. The temperature setting
Temperature Format
.
Temperature Limit
o
77-99 F) and Low temperature limit
Temperature Alert
beep and display Temperature High
temperature at the Baby Unit is detected above or below the maximum or
minimum temperature limits you set.
+
5. Press the UP button or
confirm by pressing the
4.8

Power Saving mode

M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
O
3. Press the
+
4. Press the UP button or
video to turn off after 5 mins, 30 mins or 60 mins if no buttons have been
pressed.
5. The audio will remain on, and you can press any button to turn the video
screen back on.
Note:
If there are multiple cameras in scan mode, the audio will switch about every 30
seconds.
18
>
RIGHT button until
button to show the temperature options.
/
- to select either Centigrage
to define the High temperature limit
- Turn the temperature alert ON, the Parent Unit will
-
DOWN button to select your setting and
O
button.
>
RIGHT button until
button to show the power saving options.
-
DOWN button to select for the parent unit
/ will pop up.
o
(10-24 C/50-76
or Temperature Low
V
is highlighted.
or Fahrenheit
o
(25-37
o
F).
when the
is highlighted.
Parent Unit Menu Options
C/