Table of Contents
Advertisement
4.7
Temperature Setting
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
O
3. Press the
4. The temperature setting
Temperature Format
.
Temperature Limit
o
(25-37
C/77-99
Temperature Alert
beep and display Temperature High
temperature at the Baby Unit is detected above or below the maximum or
minimum temperature limits you set.
+
5. Press the
UP button or
confirm by pressing
4.8
Power Saving mode
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
O
3. Press the
+
4. Press the
UP button or
video to turn off after 5 mins, 30 mins or 60 mins if no buttons have been
pressed.
5. The audio will remain on, and you can press any button to turn the video
screen back on.
Note:
If there are multiple cameras in scan mode, the audio will switch about every 20
seconds.
Parent Unit Menu Options
>
RIGHT button until
button to show the temperature options.
/
- to select between Centigrade
- to define the High temperature limit
o
F) and Low temperature limit
- Turn the temperature alert ON, the Parent Unit will
-
DOWN button to select your setting and
O
button.
>
RIGHT button until
button to show the power saving options.
-
DOWN button to select for the parent unit
/
will pop up.
(10-24
or Temperature Low
V
is highlighted.
or Fahrenheit
o
o
C/50-76
F).
when the
is highlighted.
19
Advertisement
Table of Contents
