Specifications; Tool Specifications - Stanley ProSet XT1 Service Manual

1. Adequate clearance is required for the tool operator's hands before proceeding.
2. Do not abuse the tool by dropping or using it as a hammer.
• Care should be taken to ensure that spent mandrels do not create a hazard.
• The mandrel collector must be emptied when approximately half full.
• DO NOT use the tool without mandrel collector installed.
• DO NOT let air exhaust opening on the mandrel collector face in the direction of the operator or other
persons.
• Contact with hydraulic fluid should be avoided. To minimise the possibility of rashes, care should be taken
to wash thoroughly if contact occurs.
• Material Safety Data Sheets data for all hydraulic oils and lubricants is available on request from your tool
supplier.
STANLEY Engineered Fastening policy is one of continuous product development and improvement
and we reserve the right to change the specification of any product without prior notice.

2. SPECIFICATIONS

The ProSet® XT1 are hydro-pneumatic tools designed to place Stanley Engineered Fastening blind rivets at
high speed.
The tools feature a vacuum system for rivet retention and trouble free collection of the spent mandrels
regardless of tool orientation.
When coupled to the relevant nose equipment the ProSet® XT1 can be used to place blind rivets in the range
of Ø2.4mm to Ø4.8mm. Refer to the table on page 7 for a list of all rivets that can be placed.
The safety warnings on pages 4 & 5 must be followed at all times.

2.1. TOOL SPECIFICATIONS

Pull-Force: @5.5 bar
Air Supply Pressure: Min. to Max.
Oil Pressure: Pull @ 5.5 bar
Stroke: Minimum Piston Stroke
Weight: Incl. nose equipment
Weight: without nose equipment
Free Air Volume: @ 5.5 bar
Cycle Time: Approximate
Noise Level:
Uncertainty noise: k = 3db(A)
Vibration Level: Uncertainty
vibration: k = 0.1 m/s
2
XT1
6.5 kN
5.0 – 7.0 bar
160 bar
17.8 mm
1.17 kg
1.07 kg
1.5 ltr
0.4 seconds
77.95 dB(A)
<2.5 m/s
2
E N G L I S H
1461 lbf
72.5 – 101.5 lbf/in
2
2320 lbf/in
2
0.7 in.
2.58 lb
2.36 lb
91.5 in
3
<8.2 ft/s
2
9