Nail Specifications - Stanley FMFP12704 Operation And Maintenance Manual

Coil roofing nailer

Hide thumbs

Table Of Contents

Table of Contents

Available languages

• DEPTH ADJUSTMENT: To reduce risk of serious injury from accidental

actuation when attempting to adjust depth, ALWAYS:

• Disconnect air supply.

• Avoid contact with trigger during adjustments.

• Do not drive nails blindly into walls, floors or other work areas.

Fasteners driven into live electrical wires, plumbing, or other types of

obstructions can result in injury. (Fig. U)

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use tool while tired or under the

influence of drugs or alcohol. A moment of inattention while operating

power tools may result in serious personal injury.

Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to the State of California to

cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

• lead from lead-based paints

• crystalline silica from bricks and cement and other masonry products

• arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

Use of this tool can generate and/or disburse dust, which may cause

serious and permanent respiratory or other injury. Always use NIOSH/OSHA

approved respiratory protection appropriate for the dust exposure. Direct particles

away from face and body. Always operate tool in well-ventilated area and provide

for proper dust removal. Use dust collection system wherever possible.

ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT

safety glasses. Also use face or dust mask if operation is dusty. ALWAYS WEAR

CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA respiratory protection.

Before operating this tool, carefully read and understand all instructions

in Important Safety Instructions.

Nails

Lengths

Air Inlet