Ecom EN2-F Quick Manual page 8

Gas analysis display screen (continued)
Pressing <F4> goes to "Edit" mode which allows the user to change
the line items on the display screen.
In "Edit" mode, the values on the screen can be changed to what the
user wants to see. To change these values, press F4 and you should
st
see the 1 line start blinking:
 Select line you would like to change with Up/Down – it will
blink
 Select parameter you would like to see with Right/Left
 Repeat until the display screen shows what you want it to
 Press F4 to accept changes
Page 8